Royal Luxury Handcrafted Carved Teak 3 Seater Sofa Set | Blue and Ivory Tufted

The Story Behind This Sofa

Comfort in a sofa is engineered from the bottom up, and almost none of it is visible in a photograph.

It starts at the seat platform. Webbing or springing is fixed across the seat rails under tension and is what actually carries a person's weight - foam alone sitting on a solid board gives the hard, dead feel that makes an expensive-looking sofa unpleasant after twenty minutes. Tension is set by hand and checked across the full width so the seat does not sag toward the middle where it is used most.

Above that sits the cushion build. A seat cushion is not one block: it is a core with softer layers wrapped around it, so the first impression is soft and the support underneath is firm. Get the ratio wrong and the sofa either feels hard immediately or bottoms out after six months.

Then the tufting. Each button on that back panel is pulled through the padding and tied off behind, compartmentalising the filling so it cannot migrate. Every button is placed by hand to a marked grid - a tufting grid that drifts is visible instantly across a room.

Factual specification for this royal luxury carved teak sofa set:

• Material: Solid teak wood frame, hand-carved (no veneer, no engineered wood in load-bearing members)
• Style: Rococo carved show-wood sofa with deep button-tufted back
• Finish: Ivory hand-painted show wood with silver highlights on the carving; customisable to gold leaf, antique gold, full ivory or dark wood polish
• Carved detail: Pierced carved crest, carved cartouche frames to the back panels, carved arm volutes, deeply pierced full-width apron, carved scroll feet
• Upholstery: Deep hand button-tufted centre back panel, diamond-quilted side panels, blue and gold damask bench seat cushion, scatter cushions and tasselled bolster as photographed; fabric, velvet or leather all available
• Seat construction: Tensioned webbing or spring platform over the seat rails, layered cushion core with softer wrap; seat firmness specified by you - soft, medium or firm
• Seating: Shown as a 3 seater; made to order as 2, 3, 4, 5, 7 or 9 seater, corner or L shape, with matching single chairs
• Size: Custom dimensions made to order
• Delivery: Pan-India, free shipping

Packaging and Transit Protection

Tufted upholstery has a specific transit vulnerability: sustained pressure on a tufted panel can crush the padding around the buttons and leave a flattened patch that takes weeks to recover, if it recovers at all. So the back panel is protected with a standoff layer rather than wrapped tight - foam blocking that bridges over the tufting instead of pressing onto it.

The upholstery is covered first in a soft breathable cloth wrap rather than sealed plastic, which would trap moisture against a pale carved frame and coloured fabric on a long road journey. The pierced carved crest, both arm volutes, the full-width apron and the feet are each individually foam-wrapped and taped clear of the painted and silvered surfaces. Loose cushions and the tasselled bolster are bagged separately so they arrive uncrushed, with the tassel wrapped so it cannot snag. The sofa is corner-guarded, blocked into a fitted crate with foam on every face, marked for orientation and lifting points, and photographed sealed before dispatch.

Shipping and Delivery

Every sofa is built to order and comfort is part of the specification. At the order stage we confirm your seat firmness preference, cushion build, seat height and seat depth alongside the fabric and seater count. Typical lead time is 8 to 10 weeks from order confirmation, longer for larger sets since a 7 or 9 seater is several frames carved, finished and upholstered individually. We share progress photographs after carving, after finishing and after upholstery.

Delivery is free anywhere in India - Mumbai, Delhi, Bangalore, Hyderabad, Chennai, Pune, Kolkata, Ahmedabad and elsewhere. Our team unloads, unwraps, places and levels the sofa and fits the cushions at your address. Please confirm doorway, stair and lift dimensions in advance: a carved show-wood sofa cannot be tilted or squeezed through a tight opening, because the carving takes the load rather than a soft upholstered edge. International orders quoted case by case.

Craftsmanship Assurance and Care

Our craftsmanship assurance covers the solid teak frame, its joinery, the hand-carving and the seat platform. If a joint works loose, a webbing or spring platform fails, or a carved element separates because of a fault in the making - rather than through impact, misuse, standing or jumping on the seat, or an attempted self-repair - we repair or replace it. Foam and fabric are consumable components with their own service life; we confirm those terms at the order stage.

All foam softens with use - this is normal and not a fault. What prevents it becoming uneven is rotation: turn and plump the seat cushion weekly, and alternate which end of the sofa gets used. Do not sit on the arms or the back rail, which loads the frame in a direction it is not designed for. Vacuum the tufted panel with a brush attachment and use a soft brush around the buttons, where dust collects in the folds. Blot spills immediately, never rub. Dust the ivory and silver show wood with a dry soft cloth and brush; never use water, chemical polish or solvent cleaners on the frame or the fabric.